|Why||The goal of the Dragino is to solve the connectivity problem and greatly enhance microcontroller products such as the Arduino.|
|Tags||OpenWrt, Linux, Wifi, Arduino, Ethernet|
What is Dragino
The Dragino lets you embed Linux into your MCU project. It is a low cost, open hardware Linux motherboard for microcontrollers. It runs Linux, using OpenWRT, and has full Ethernet and 802.11b/g Wifi capabilities.
The goal of the Dragino is to solve the connectivity problem and greatly enhance microcontroller products such as the Arduino. Dragino has a powerful 180MHz CPU, 8M flash, 16M RAM, Ethernet, Wifi and runs OpenWRT firmware.
Applications include remote control of robots, data logging, web applications for data presentation, mesh networking over Wifi and many more.
The first Dragino motherboard is named Dragino MS12.
- OpenWrt Inside
- Open Hardware Design
- AP, Client or Mesh mode for Wifi
- Modular Design, Easy for adoption
- Production Enclosure
- Low Cost
- 12 Pole Sensor I/O
- Web Server Inside
- CPU: Atheros AR2317, processor 180MHz, MIPS 4K.
- 8MB Flash
- 32MB SDRAM
- 1 x 10/100M Ethernet port
- STATUS LEDS: PWR, HeartBeat, WIFI, ETH, SYS
- DC Input: 9 ~ 15v
- IEEE 802.11b/g
- Frenquency Band: 2.4 ~ 2.462GHz
- External antenna
- 12 positions screw terminal for sensor input or output to control moto etc,
- 5 GPIOs from AR2317, Can be simulated as SPI
- Serial UART Interface
- 3v/5v/raw power
FCC Part 15 Subpart B, Subpart C R&TTE: EN60950-1:2006+A11:2009 EN62311:2008 ETSI EN 301 489 -1 V1.8.1 ETSI EN301 489-17 V2.1.1 ETSI EN 300328 V1.7.1 CE: EN55022:2006+A1:2007 EN55024:1998+A1:2001+A2:2003 EN61000-3-2:2006+A1:2009+A2:2009 EN61000-3-3:2008